Presentations and Authors


Last name A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Track:
 

Plenary Lecture & Thematic Plenary Lecture (by invitation only)

Computational applications in masonry structures: From the mesoscale to the super-large / super-complex
Paulo B Lourenco
A Computational Multiscale Framework for Coupled Transient Electromagnetic-Mechanical Phenomena for Antenna and Sensors
Somnath Ghosh
Multiscale Simulation of Metals from Atoms to Components
Siegfried Schmauder
Is the Discrete Element Method Predictive?
Jose Andrade
Computational Device Mechanics – The Design and Computation in Acoustics and Biomechanics
Fangsen Cui
On the Dynamics of Highly Nonlinear Lattice Materials
Fernando Fraternali
A new meshfree method: free element collocation method (FECM)
Xiao-Wei Gao
A Multiphysics Computational Modeling of Smart Magnetic-Sensitive Soft Matters
Hua Li
A triple-scale discrete-continuum coupling method for path-dependent porous media enhanced by recurrent and recursive deep learning
WaiChing Sun
Computational modeling of masonry structures
Sacco Elio
Computational Issues in the Nonlinear Dynamics and Control of Macro/Micro-Mechanics
Giuseppe Rega
Weight is a potential motion. The analysis of vaulted structures with a regularized Non-Smooth-Contact-Dynamic approach
Gianni Royer Carfagni
Structure and mechanical behavior of self-organized fibrous materials
Catalin Picu
Verification and Validation of Numerical Methods in Geotechnical Earthquake Engineering
Majid T Manzari
MULTIPHYSICS-MULTISCALE MODELING OF SEVERE-ENVIRONMENT MATERIALS
Nasr Ghoniem
Integrating Structure and Control Design using the Tensegrity Paradigm
Robert E Skelton
Multiscale Damage Modelling of Sustainable Composite
Shyam M. Panamoottil, Raj Das, Krishnan Jayaraman

MS-100 General Papers

KEY-NOTE: Topology optimization of transient heat transfer problems using Fourier and Cattaneo idealizations
Marco Pingaro, Paolo Venini
Invited: Modeling Observational Learning with Recurrent Hopfield Neural Networks
Giorgio Gosti, Giancarlo Ruocco, Viola Folli
Study of Error based on Six Segments Ring Pair Electrical Resistance Sensor
Xiaona Wang, Yi Ding, Shide Song, Yi Huang
Parametrization of radiative properties of mono- and multi-component plasmas for astrophysics and nuclear fusion applications
Guadalupe Espinosa, Rafael Rodriguez, Juan Miguel Gil
Computational Package for the Simulation of Plasma Microscopy Properties and Ion Beam-Plasma Interaction in High Energy Density Plasmas
Juan Miguel Gil
Tsunami Run-Up Simulation Using Particle Method and its Visualization with Unity
Takahiro SAITOH, Gohki Noguchi, Takumi Inoue
Prediction of the Glass Transition Temperature of Polymer Systems
Jong Hak Kim
Auto-adaptive resolution strategy for wave equations in integral formulation
Nadir Alexandre Messai, Sébastien Pernet, Marc Bakry
Mode shapes complexity for damage identification of structures experiencing plasticization
Fabrizio Iezzi, Claudio Valente
Nonlinear vibration of an elastic soft string: large amplitude and large mechanical curvature
Demin zhao
Numerical simulation of natural convection from a heated cylinder
Gregor Kosec, Jure Slak
A dynamic analysis of base isolated structures subject to strong dynamic loadings
Fabio De Angelis, Donato Cancellara
Wire rope model with elliptic cross sectional outer wires
Cengiz Erdönmez
Research on the Optimization Method of Modular Design in Architecture Based on Digital Information Technology
Shanchao Xin, Zhiqiang Wang, Yun Wang

MS-000 Theory and Formulation for Novel Computational Methods

Optimal design and error analysis based on pulsed eddy current sensor
Shide Song, Tianyang Qu, Xiaona Wang, Yi Huang
Numerical evaluation of singular integrals using the tetrahedron polar co-ordinates
Jungki Lee
Multi-region Isogeometric Analysis using Boundary Integral Equation
Bonyong Koo
A robust inversion-based Fourier Transformation algorithm used in the interpretation of non-equidistantly measured magnetic data
Mihaly Dobroka, Daniel Nuamah, Tamas Ormos, Judit Somogyi Molnar

MS-001 Multiscale and Multiphysics Modeling for Complex Materials (MMCM11)

KEYNOTE: Advanced triaxial interface elements for nonlinear mesoscale modelling of brick-masonry
Lorenzo Macorini
KEY-NOTE: Stress evaluation in nonhomogeneous nonlocal elastic 2D structures
Paolo Fuschi, Aurora Angela Pisano
KEY-NOTE: Computational methods for confined concrete composites at the mesolevel through the aid of 3D advanced measurement techniques
Carmelo Majorana, Gianluca Mazzucco, Beatrice Pomaro, Giovanna Xotta, Nico De Marchi, Valentina Salomoni
INVITED: Homogenization of graphene sheet reinforced composites considering material and geometrical uncertainty
Dimitrios Savvas, George Stefanou
Invited: Fast Statistical Homogenization Procedure (FSHP) for Particle Random Composite
Marco Pingaro, Emanuele Reccia, Patrizia Trovalusci
INVITED: A multilevel domain decomposition method based on a couple-stress homogenization approach for the failure analysis of masonry structures
Lorenzo Leonetti, Fabrizio Greco, Patrizia Trovalusci, Raimondo Luciano
INVITED: An effective elastic model for nanostructured composite materials
Michela Talo, Walter Lacarbonara, Giovanni Formica, Giulia Lanzara
Quantitative Modeling for Gas Bubble Evolution in Nuclear Fuel and Pitting Corrosion
San-Qiang Shi, Zhihua Xiao, Talha Q ANSARI
A biphasic continuum model for large deformation visco-elastic mechanics of uncured carbon fibre prepregs
Amir Hosein Sakhaei, Timothy James Dodwell
Stochastic homogenization of polymeric composites with randomly ellipsoidal reinforcement
Damian Sokołowski, Marcin Kamiński
Evolution of tolerance averaging technique on the example of thermo-elasticity problem in micro-heterogeneous structures
Piotr Ostrowski
Vibrations and stability of slender visco-elastic periodic beams posed on a foundation with damping. Tolerance modelling
Jarosław Jędrysiak

MS-002 Multiscale Modeling and Simulation of Advanced Materials and Structures

Keynote: Computational Design of Acoustic Metamaterials with Volumetric Locking and Uncertainty Issues
Quan Bing Eric Li
Numerical investigation of beam-column connections using a new multi-axial-spring model
Hu Qi, Haishan Guo, Kan Liu, Lida Tian, Jiao Geng
Generation Of Open-Foam RVEs With Strut Variations Using Distance Fields And Level Sets
Nanda Gopala Kilingar, Ludovic Noels, Karim Ehab Moustaffa Kamel, Thierry Jacques Massart
Computational design of new 2D nanostructures
Tadeusz Burczynski
Hybrid multiscale model for nonlinear analysis of arbitrarily stiffened composite structures
jie cong, Kuo Tian, Tong Li, Mingfa Ren, Bo Wang
Simulation of metallic powder bed additive manufacturing processes
Aleksandr Zinoviev, Olga Zinovieva, Vasily Ploshikhin

MS-003 Computational Modeling of damage and failure in Materials and Structures

Numerical Study on Debonding Failure between FRP and Concrete
Huang Lihua, Yang Zhiquan, Wang Yuefang
Numerical simulation of Riedel shear in surface earthquake faults
Sayako Hirobe, Kenji Oguni
FEM non-linear modelling of cob using ANSYS
Alejandro Jimenez Rios, Dermot O'Dwyer
Simulations of Dynamical Fracture of Concrete using Implicit Time Integration
Josef Květoň
Efficient simulation of the through-the-thickness damage composition in composite aircraft structures for use with integrated SHM systems
Marc Garbade
Timber shear walls: numerical assessment of the equivalent viscous damping
Giorgia Di Gangi, Cristoforo Demartino, Giuseppe Quaranta, Marco Vailati, Giorgio Monti, Marc’Antonio Liotta

MS-004 Particle Based Methods

Keynote: The influences of strain rate on the failure behavior of nanowire by atomistic simulation
Yan Liu, Leiyang Zhao
Keynote: v-p Form Material Point Method for Weakly Compressible Problems
Zhenpeng Chen, Xiong Zhang
Keynote: The Development of the MPM for Better Simulating Nonlocal Failure
Zhen Chen
Micromechanical Modeling of Heterogeneous Materials by Computational Grains
Leiting Dong
Precise integration dynamic analysis of equivalent spring particle elements in the continuum mechanics
XiangRong Fu, MingWu Yuan, Pu Chen

MS-005 Recent Advances in Meshfree and Particle Methods

Keynote: FPM modeling of particulate flows with thermal convection
Moubin Liu
Keynote: A novel particle method to predict the compression properties of liquid marbles
Yuantong Gu
A multi-level Method of Fundamental Solutions using quadtree-generated sources
Csaba Gaspar
The Forward and Inversion Analysis of High Rock-fill Dams in Construction Period using the Node-Based Smoothed Point Interpolation Method
Shiyang Pan, Tongchun Li, Jing Cheng
The generalized finite difference method for the inverse Cauchy problem in linear elasticity
Po-Wei Li, Yan Gu, Chia-Ming Fan
A Smoothed Particle Hydrodynamics Particle Suspension Mixture Model and its application to Turbulent Sediment Transport
Erwan Bertevas, Thien Tran-Duc, Khoa Le-Cao, Boo Cheong Khoo, Nhan Phan-Thien
Assessment of nodal integration for meshfree analysis of higher-order gradient crystal plasticity
Yuichi Tadano, Seiya Hagihara
A stabilization method for smoothed particle hydrodynamics preventing tensile instability and zero-energy modes
Shoya Mohseni-Mofidi, Claas Bierwisch
Meshless Method with reduced integration – high performance
wilber Vélez, Tiago Oliveira, Elvis Pereira, Artur Portela
Solving the singular Motz problem using Radial Basis functions
T. S. Li, S. M. Wong
Computation of Deformable Image Registration by Weighted Kernel-based Meshless Method
S. M. Wong, K. S. NG, T. S. Li

MS-006 Large Scale Coupled Problems and Related Topics

KEYNOTE: Finite element analysis of a human body model with smooth organ boundaries in the high-frequency electromagnetic field
Masao Ogino, Yoshitaka Wada, Amane Takei, Shin-ichiro Sugimoto
A reactive molecular dynamics study of graphene as a protective barrier against hydrogen embrittlement
Lijun Liu, Katsumi Hagita, Jun Hirotani
3-D Discrete Dislocation Dynamics Simulation Considering Boundary Effect Coupling With Finite Element Method
Hongjie Zheng, Ryuji Shioya, Hiroshi Kawai, Akiyuki Takahashi
Analysis for flow induced vibration of slender tubes of a shell-and-tube heat exchanger
Yuefang Wang, Feng Su, Hai Shi, Yan Liu
Numerical Simulation of Human Skin Burns Using Finite Element Method
Abul Mukid Mohammad Mukaddes, Ryuji Shioya, Rezwan Jaher, Dipon Roy
Element-by-element matrix storage-free subdomain local FE solver for domain decomposition method
Hiroshi Kawai, Masao Ogino, Ryuji Shioya, Tomonori Yamada, Shinobu Yoshimura
Efficient Computational Strategy for Fluid Structure Interaction Problem using Asymmetric Solver with Machine Learning
Yasushi Nakabayashi, Masato Masuda, Shinsuke Nagaoka

MS-007 Fracture mechanics and structural integrity

Numerical simulation of crack propagation interacting with microdefects using adaptively refined XFEM
zihao teng, dunming liao
Elastic-Plastic Interaction of a Griffith Crack with a Wedge Disclination Dipole in an Inclusion-Matrix System
Mu Fan
A finite element based procedure for accurate determination of mode I SIF of orthotropic materials based on two parameter strain series
Debabrata Chakraborty, Debaleena Chakraborty, K. S. R. K. Murthy
Parametric Study on RPV Integrity Assessment under Pressurized thermal Shock
Jong-Wook Kim, Hanbum Suhr, Shinbeom Choi
An application of the Option design pattern to the probabilistic fracture mechanics program
Yasuhiro Kanto

MS-008 Computational Multiphase and Complex Flows

Numerical modeling of flow and reaction characteristic in chemical looping combustion system
Liyan Sun, Kun Luo, Jianren Fan
Computational Fluid Dynamics Modelling of Slurry Transport by Pipeline
Ming-zhi Li
Keynote: Modeling the Wind-blown Sand Impacts on High-speed Train
Guangjun Gao, Ya-ni Zhang, Chen Jiang
KBL: A knowledge based learning method for extracting formulas of aerodynamic heating
Changtong Luo, Zonglin Jiang
High-resolution Capturing of Discontinuities of Multi-component Flows
Yang-Yao Niu
Particle simulation of sliding mud-water interaction
Khoa LE CAO
Numerical simulation of particle settling in an inclined vessel
Te,Yao Chiu, Yi,Ju Chou
The effects of rotation on gravity currents: from stable to unstable flow behavior
Ching-Sen Wu
Numerical investigation of hydrodynamic coupling between a falling immersed sphere and its downstream wall
Fuling Yang
Effects of uncertainty in bubble density on flow structures in shock-bubble interaction
Jonghoon Jin, Xi Deng, Yoshiaki Abe, Feng Xiao

MS-009 Micro-Nano Mechanics of Materials: Theory, Simulation and Experiment

KEYNOTE: Investigation of Structural and Mechanical Properties of Silk Fibroin and its Applications in Biomedical areas
Yuan Cheng
KEYNOTE: Two-Dimensional Water/Ice in Graphene Nanocapillaries
YinBo Zhu
Self-folding mechanics of graphene tearing and peeling from a substrate
ZeZhou He, YinBo Zhou, HengAn Wu
Pressure-dependent transport characteristic of methane gas in slit nanopores
Hao Yu
Forces within Three Phase Contact Zone: a mechanical interpretation of Young's equation at the nanoscale
Jingcun Fan
Asymmetry mechanism of anion and cation transporting in angstrom-scale graphene channels
YanZi Yu
The size-dependent behavior of a broadband magnetic energy
Feng Jin
Micro-nano-CT imaging in shale structure analysis
Yanfei Wang

MS-012 Methods for Multi-Phase Flows

KEYNOTE: Simulations of Thermal-Hydraulics Two-Phase Flows using Mixture Formulations
Dia Zeidan
Level-set based numerical simulation of vapor bubble motion in acoustic fields
Sungwook Cho, Gihun Son

MS-013 Computational Modeling in Biomedical Applications

Biological Ion Channels: Theory and Simulation
Jinn-Liang Liu
The study of the multi-scale modeling method to determine the reason of the graft’s non-patency based on transit time flow-meter
Boyan Mao, Youjun Liu, Wenxin Wang, Bao Li
Computational analysis and optimisation of coronary stents
Nai Chun Liu
Delineating protein-protein curvilinear dissociation pathways and energetics with multi-walker umbrella sampling molecular dynamics simulations
Jung-Hsin Lin
Optimization of Left Ventricle Pace Maker Location Using Echo-Based Fluid-Structure Interaction Models
Longling Fan, Dalin Tang, Jing Yao, Chun Yang, Di Xu
Predicting Plaque Area Increase and Plaque Burden Increase Using Patient-Specific Fluid-Structure-Interaction Models Based on IVUS and OCT Images with Follow-Up
Xiaoya Guo, Dalin Tang, David Molony, Chun Yang, Habib Samady, Jie Zheng, Gary Mintz, Akiko Maehara, Jian Zhu, Genshan Ma, Don Giddens

MS-014 Mechanical behavior of low-dimensional materials and nanomaterials

KEY-NOTE: The microscopic deformation mechanism and energy dissipative mechanism of graphene foam materials
Chao Wang, Shaohua Chen
Interface effect on failure of ceramic coating/alloy substrate systems
Lihong Liang
Size dependent elasticity of nanoporous materials predicted by surface energy density-based theory
Yin Yao
Theoretical study on the directional motion of a nano-object driven by inhomogeneous strain
Zhilong Peng
Grain Boundaries Applied in Attenuation of Mechanical Transverse Wave Propagations in Graphene
Jun Xia
Straining Two-Dimensional Materials at Strong Interfaces: The Shear-Lag Model and Experiments
Pei Zhao

MS-015 Computational Methods in Fluid Engineering

KEYNOTE: A cell-based smoothed radial point interpolation method for groundwater flow simulation captured by the horizontal reactive media well
Wen Li, G.R. Liu, Guangming Yao, Michelle Crimi
Keynote: CFD simulation of chemical gas dispersion under atmospheric boundary conditions
George Xiangguo XU
Simulation of liquid cargo – vehicle interaction under lateral and longitudinal accelerations
José A. Romero, Frank Otremba, Alejandro A Lozano-Guzman
A Semi-Lagrangian Method Based on Moving Particles and Its Application in Fluid Simulation of Casting Filling Process
Yulong Tang, dunming liao, Tao Chen, ShuYuan Fan
Effects of seismic actions in offshore areas using the boundary element method
Andriy Kryvko, Alejandro Rodríguez-Castellanos, Norberto Flores-Guzmán
CFD analysis of EHD flow in the circular pipe with electrodes
Tetsuhiro Tsukiji, Takahiro Shimizu
A novel approach for regulation of the diffusive effects of limiters in viscous-compressible-flow computations using a boundary-layer sensor
Anoop K Dass, Paragmoni Kalita
A Discontinuous Galerkin Method for Compressible Flow on 3D Hybrid Grids
Penghui Su, Liang Zhang
Comparison of Characteristic-wise WENO and Central Difference Schemes with Numerical Viscosity Models for the Unsteady Compressible Flow
Hyun-Jin Kwon, Se-Myong Chang

MS-016 Smoothed Finite Element Methods and Related Techniques

KEYNOTE: Selective cell-based smoothed finite element method using 10-node tetrahedral elements for large deformation of nearly incompressible solids
Yuki Onishi
Keynote: An octree algorithm together with the cell-based smoothed finite element method (CS-FEM) for adaptive stress analysis
Shuyong Duan, Shuhao Huo, Xu Han, YinShan Li, GuiRong Liu
Electrodeposition simulation with edge-based smoothed finite element method using 4-node tetrahedral elements for complex car body shapes
Kai Kitamura
Unsymmetric Mindlin-Reissner Plate/Shell Finite Elements Insensitive to Severe Mesh Distortion
Yan Shang

MS-017 Numerical modelling of fires and solid combustion

A numerical study of thermal impact of forest fires on buildings
Valeriy Perminov

MS-018 Computational Marine Hydrodynamics

Numerical Analysis on Two Floating Offshore Wind Turbines with Different Layouts
Wan Decheng, Yang Huang
Numerical Simulation of Ship Bow Wave Breaking using SST-DES and SST-URANS
Wan Decheng, Zhen Ren
Numerical Calculations for Smooth Circular Cylinder Flow in different Reynolds Numbers with SST-DDES Turbulence Model
Wan Decheng, Jiawei He
Numerical Study of Bubble Coalescence during Rising Process by Multiphase MPS Method
Wan Decheng, Xiao Wen
Drag reduction of KCS based on extended FFD method and EGO
Wan Decheng, Aiqin Miao
Keynote: Numerical Investigation of Vortex-induced Vibration (VIV) of a Flexible Cylinder in Combined Flow
Wan Decheng, Di Deng
Numerical investigation on harmonic components of wave loads on a vertical cylinder
Wan Decheng, Zhenghao Liu
Sloshing characters for vary density in depth
ZHEN WANG, Zongbing Yu, Li Zou

MS-021 Wave propagation in linear and nonlinear media

Numerical simulation of nonlinear elastic wave propagation in locally damaged reinforced concretes
Benjamin Ankay, Chuanzeng Zhang
Keynote: 2-D inverse scattering analysis using pure SH wave for delamination in carbon fiber reinforced plastic
Sohichi Hirose
A frequency-domain boundary element method using Sinc approximation for SH wave scattering
Akira Furukawa
Wave propagation in the piezoelectric porous material filled with charge ions
Young June Yoon
Optimization strategy for development of new numerical models
Mateusz Gawronski, Pawel Packo

MS-022 Methods of approximate calculations of statically indeterminate systems

Nomograph to calculate amount of reinforcing bar against bending moment in Circular Void slabs
Shigehiro MOROOKA
Keynote: Analysis of the results obtained from the application of the two-stage method with calculations of some statically indeterminate trusses
Janusz Rębielak
Two-stage method applied in calculations for statically indeterminate truss of larger span
Janusz Rębielak

MS-025 Structural Optimization Methods and Applications

Hole nucleation for level set based topology optimization by hard kill as BESO
Qi Xia
Dynamics and hybrid optimization of cylindrical composite shells
Leonard Ziemianski, Bartosz Miller
Multiscale structural and thermal optimization towards 3D printable structures
Chikwesiri Tolu Imediegwu, Ryan Murphy, Robert Hewson, Matthew Santer
Variable screening by global sensitivity analysis and its application in uncertainty based optimization
Changcong Zhou, Zheng Zhang, Fuchao Liu
Shape and Topology Optimization Method for Designing a Shell Structure with Multi-materials
Masatoshi Shimoda
Application of Uniform Design on Improvement Design of Detector Slides in Switch Machine system
Yung-Chang Cheng
Multi-Fidelity Optimization for Aerospace Vehicle Design
RAMANA V GRANDHI, Christopher Corey Fischer
Projection-Based Topology Design Optimization with Discrete Object Projections
Seung-Hyun Ha
Keynote: Multi-material Topology Optimization for Continuum Structure by Using Independent Continuous Mapping Method
Hongling Ye, Zongjie Dai, Yunkang Sui

MS-026 Computational Methods for Uncertainty Quantification

Uncertainty Quantification of Complex Nonlinear Systems using Structural Health Monitoring Techniques
Dana Elie Nasr, George Saad
A modified rolling bearing fault diagnosis approach based on improved multiscale permutation entropy and generalized hidden Markov model
Youmin Hu
Deep learning based rapid response tools for air pollution prediction and uncertainties analysis
Dunhui Xiao, Fangxin Fang, Jie Zheng, Junxi Li, Christophe C Pain, Ionel M Navon
Multivariate global sensitivity analysis for the tubular structure using neural network
Wang Pan, Tan Shiwang

MS-027 Stochastic simulation and dynamic reliability analysis of geological and geotechnical problems

KEYNOTE: Stochastic liquefaction hazard assessment for urban regions based on soil dynamics
Jian Chen, Tomohide Takeyama, Hideyuki O-tani, Satoru Oishi, Hori Muneo
KEYNOTE: Effect of soil properties on seismic response of underground station
Sunbin Liang, Zhiyi Chen
A stochastic multi-criteria decision-making model for vulnerability assessment of natural disasters: A case study in Beijing
Qian Zhao, Yan Bing Ju, Jun Ma, Wen Kai Zhang
Failure-flow process simulation of landslides triggered by earthquakes
Geye Li, Yu Huang
Reliability analysis of reinforced soil slope system considering local reinforcement failure
Rui Sun, Jianfeng Chen, Ming Peng
The simulation of the stochastic slip distribution of earthquake rupture
yi zhong
Solid-fluid transition modeling of flow liquefaction considering instability state of soil
Xueqian Ni, Bin Ye, Yu Huang, Feng Zhang
The effect of spatially varying permeability on hydrate-production-induced instability of a submarine slope
Lin Tan, Fang Liu, Yu Huang
KEYNOTE: Stochastic simulation and dynamic reliability analysis of earth structures
Yu Huang
Solution of stochastic dynamic difference equation based on machine learning method
Min Xiong, Yu Huang
Winkler model for seismic response of shafts under stochastic earthquakes
Bu Zhang, Zhiyi Chen
Failure modes analysis of a multi-story subway station under stochastic earthquake based on probability density evolution method
Zhiqian Liu, Zhiyi Chen

MS-028 Data-driven computational structural mechanics of existing and damaged structures

KEYNOTE: Assessing modal property variation in an historical retrofitted masonry building
Francesco Potenza, Gattulli b_Vincenzo, Francesco Smarra, Alessandro D'Innocenzo, Fabio Graziosi
Fatigue Damage Estimation of Large Scale Structural Systems using Finite Element Model Updating Techniques and Output Vibration Measurements
Dimitrios Giagopoulos, Alexandros Arailopoulos, Sotirios Natsiavas
Ambient vibration testing of existing buildings aimed to seismic assessment: experiences in Liguria
Daniele Sivori, Serena Cattari, Roberto De Ferrari, Marco Lepidi, Daniele Spina
VISION-BASED SYSTEM IDENTIFICATION FOR MDOF STRUCTURES
Seunghoon Shin, Wonbin Park, Donghyeon Seol, Hongjin Kim
A data-driven diagnostic tool for wind turbines under operational variability
Simona Bogoevska, Eleni Chatzi, Elena Dumova-Jovanoska, Rüdiger Höffer
Data-Driven Bayesian Uncertainty Quantification and Propagation Framework for Dynamical Systems
Papadimitriou Costas

MS-030 Computation design and dynamics of lattice metametrials

INVITED: Numerical modeling of the band structure of tensegrity metamaterials
ADA AMENDOLA, Anastasiia Krushynska, Chiara Daraio, Nicola M. Pugno, Fernando Fraternali
A computational approach to the static of masonry vaults reinforced with composite materials
Valentino Paolo Berardi, Mariella De Piano, Rosa Penna, Luciano Feo
Vibration and wave propagation in pre-deformed periodic lattice frame structures
Marius Mellmann, Chuanzeng Zhang

MS-031 State-of-the-art modeling on discrete element simulation

KEYNOTE: DEM-based method study of steam biomass gasification in a fluidized bed reactor
Shuai Wang
KEYNOTE: Discrete element modeling for industrial multi-phase flows
Mikio Sakai
Development of an implicit algorithm for drag force term in an Euler-Lagrange approach
Yuki Mori, Mikio Sakai
Numerical study on solid-liquid separation in a stirred vessel
Kotaro Tamura, Mikio Sakai
DEM Modelling of normal impact of wet particles
Chuan-Yu Charley Wu, Ling Zhang
Hydrodynamics and heat transfer validation of a coarse grained particle method in a bubbling fluidized bed
junjie Lin

MS-032 Modeling of fracture and fragmentation of solids under dynamic loading: deterministic & probabilistic approaches

KEYNOTE: Numerical simulation of mechanical behavior of Zr-Nb alloys in a wide temperature range
Vladimir A. Skripnyak, Evgeniya G. Skripnyak, Vladimir V. Skripnyak, Vitas Serbenta, Natalia Skripnyak
INVITED: Numerical simulation of metal-intermetallic laminate composites failure under dynamic loading
Sergey A. Zelepugin, Alexey S. Zelepugin, Alexey Popov, Dmitri Yanov
INVITED: Fracture of alpha titanium alloys at high strain rates and stress triaxiality
Vladimir V. Skripnyak, Alexander A. Kozulyn, Evgeniya G. Skripnyak, Vladimir A. Skripnyak
Numerical simulation of simultaneous multiple fractures initiation in unconventional reservoirs through injection control of horizontal well
Chuang Liu
Modeling of the plastic deformation of metal-intermetallic layered composites
Yana Lipatnikova, Artem Solov'ev, Yuliya Solov'eva, Vladimir Starenchenko

MS-033 Multiscale modelling of damage and fracture in quasi-brittle materials

Keynote: Meshfree modelling of dynamic mixed-mode fracture in fibre-reinforced concrete
Rena C. Yu, Pedro Navas, Gonzalo Ruiz

MS-034 Advanced computational methods for strain localization, damage and fracture in porous media

KEYNOTE: Computational methods for localized erosion in porous media
Carlo Callari
Second gradient hydro-mechanical formulation in saturated conditions using Isogeometric analysis
Carlos PLUA

MS-035 Mechanics of Nanocomposites

KEYNOTE: Modeling and simulation of mechanical damping in nanocomposites
Giovanni Formica
INVITED: Interfacial sliding-driven hysteresis in polymer/carbon nanotube nanocomposites
Michela Talo, Walter Lacarbonara, Giovanni Formica, Giulia Lanzara

MS-036 Advanced Modelling of Composite Materials and Structures

KEYNOTE: AN INNOVATIVE NUMERICAL APPROACH FOR THE MECHANICAL ANALYSIS OF DAMAGED LAMINATED COMPOSITE STRUCTURES
Tornabene a_Francesco, Fantuzzi b_Nicholas, Bacciocchi c_Michele
INVITED: Advanced modeling of the mixed-mode delamination for composite specimens
Rossana Dimitri, Francesco Tornabene
INVITED: The influence of: specimen geometry, elasticity properties ratio and boundary conditions on purity of Mode I during interfacial crack growth in sandwich panels
Daniel Pietras, Tomasz Sadowski, Vyacheslav Burlayenko
Application of XFEM to structural analyses of composites
Toshio Nagashima
Numerical simulations of coupling effects in FGM plates by meshfree methods
Vladimir Sladek, Ladislav Sator, Miroslav Repka, Jan Sladek
Numerical analyses of cement-based piezoelectric smart composites
Jan Sladek, Peter Bishay, Pavol Novak, Vladimir Sladek
INVITED: Concrete cover separation analysis in FRP-plated RC beams via an inter-element cohesive fracture approach
Umberto De Maio, Fabrizio Greco, Lorenzo Leonetti, Paolo Nevone Blasi, Paolo Lonetti
INVITED: MECHANICAL BEHAVIOR OF ORTHOTROPIC MICROPOLAR CONTINUA SUBJECTED TO LOCALIZED LOADS
Leonetti a_Lorenzo, Fantuzzi b_Nicholas, Trovalusci c_Patrizia, Tornabene d_Francesco

MS-037 Multi-scale/mesoscale modeling of granular materials based on discrete or coupled discrete-continuum methods

KEYNOTE: Multiscale modeling of saturated granular materials in concurrent second-order computational homogenization method
Li a_Xikui, Zhang Songge, Duan Qinglin
DEM analysis of sheltering effect of ice loads on multi-legs offshore structure
Yueqiao Ba, Shuailin Wang, Shunying Ji
Hierarchical multiscale modeling of large deformation problems in granular media
Jidong Zhao, Weijian Liang
An improved DEM/FEM model for analyzing the ice–structure interaction
Shuailin Wang, Shunying Ji

MS-038 MS-038 Modelling of Plasticity, Damage and Fracture

Keynote: Determination of fracture initiation of cut surface for punching press process using ductile fracture criteria
Seiya Hagihara
Keynote: Static and kinematic shakedown analyses involving temperature-dependent properties
Shyue-Yuh Leu
Fatigue Life Prediction Based on AMPS Strain-Life Approach
Yu Hou, H. Theodore Lin
Molecular dynamics simulation of the initiation of plastic deformation in nanocrystalline material
Takuya Uehara
Numerical Simulation and Experimental Verification of Ti/APC-2/Kevlar Hybrid Composite Laminates due to Low-Velocity Impact
Ming-Hwa R. Jen, Dong-Yi Cai, Che-Kai Chang, Feng-Chi Hsu

MS-039 Computational Methods in Nonlinear Dynamics Problems

KEYNOTE: Nonlinear dynamics of continuous and discrete models of tall buildings
Angelo Luongo, Daniele Zulli
KEY-NOTE: Wave propagation in lattice materials: polarization, energy, nonlinearities
Marco Lepidi, Andrea Bacigalupo
INVITED: Dynamics and vibration stability analysis of a rotating composite beam under harmonic base excitation
Latalski Jaroslaw, Jerzy Warminski
INVITED: Dynamics of mistuned rotor - analytical and numerical calculations
Zofia Szmit
INVITED: High-dimension basins of attraction computation on clusters (distributed memory systems) with simple cell mapping
Nemanja Andonovski, Stefano Lenci
Exploiting global dynamics to investigate the effects of thermomechanical coupling in laminated plates
Valeria Settimi, Eduardo Saetta, Giuseppe Rega
Expansion of a multi-scale hysteresis friction simulation to include direction-dependent friction
Johan Steffen Bothe
The influence of non-linear parameters on the model of reconstructed middle ear
Joanna Katarzyna Rękas, Rafal Rusinek
A positional FEM formulation applied to 2D dynamic nonlinear analysis of structures and mechanisms with improved frictional internal sliding connections
Tiago Morkis Siqueira, Humberto Breves Coda
Bifurcational analysis of the friction-induced mechanical oscillator with modified LuGre friction model
Danylo Pikunov, Andrzej Stefanski
Finite Element Simulation of Rear Seat Back Frame Impacted by Wood Blocks for Securing Proper Bracket installation
Tae Ho Yoon, Hoyoon Kim, Cheol Heo

MS-040 Recent Advances in Nanocomposites and Green Materials: Theory, Computational aspects and Experiments

Impact damage behavior of basalt fibers composite laminates: comparison between thermoplastic and thermosetting matrix
Ilaria Papa, Valentina Lopresto, Petro Russo
Natural fiber composites subjected to low velocity impacts: experimental and analytical approach
Simonetta Boria, Carlo Santulli, Elena Raponi, Fabrizio Sarasini, Jacopo Tirillò
Use of natural fibrous lime mortar for improving the out of plane lateral resistance of masonry
Francesco Fabbrocino, Federico Cecchini, Pietro Russo, Francesca Nanni

MS-043 Computational methods for masonry structures

INVITED: A minimum energy strategy for the in-plane behaviour of masonry
Bruno Calderoni, Antonio Gesualdo, Antonino Iannuzzo, Monaco Michela
INVITED: Three continuum forms for regularly packed particle systems and applications
Maddegedara Lalith Lakshman Wijerathne
INVITED: Nonlinear analysis of masonry arches adopting a multiscale curved beam finite element model
Paolo Di Re, Daniela Addessi, Elio Sacco
2016-2017 Central Italy Earthquake: Seismic Assessment of "Pietro Capuzi" School in Visso (Marche)
Chiara Ferrero, Paulo B. Lourenço, Chiara Calderini
Macromechanical damage model for the 2D analysis of masonry structures
Cristina Gatta
A force-based macroelement with damage and plasticity for the analysis of masonry structures
Marialuigia Sangirardi, Daniela Addessi, Domenico Liberatore

MS-044 Recent advances in numerical methods for heat and mass transfer problems

Lattice Boltzmann method for convection and heat transfer in multi-layer metal droplet deposition
Yanlin Ren, Zhaomiao Liu, Yan Pang, Yuandi Xu, Xixiang zhong
Spectral quasi-linearization method for entropy generation using the Cattaneo-Christov heat flux model
Hiranmoy Mondal, Precious Sibanda
Heat and mass transfer of an unsteady second grade nanofluid with viscous heating dissipation
Shina Daniel Oloniiju, Sicelo Praisegod Goqo, Precious Sibanda
Application of a new multivariate spectral quasilinearisation method on a nuclear reactor problem
Sicelo Praisegod Goqo
Entropy generation in unsteady magneto-micropolar nanofluid flow with thermal radiation and viscous dissipation
Mohammed Hassan ALMAKKI

MS-045 Limit Analysis and Non-Smooth Contact Dynamics of Masonry Structures

KEYNOTE: Limit analysis of masonry structures using discontinuity layout optimization
Matthew Gilbert, John Valentino, Colin Smith, Maxime Gueguin
Keynote: Recent contributions to limit analysis of masonry structures
Antonio Tralli, Gabriele Milani, Andrea Chiozzi, Nicola Grillanda, Fabrizio Formigoni, Antonio Formisano
KEYNOTE: Solving differential variational inequalities in non-smooth dynamics using the preconditioned spectral projected gradient method
Alessandro Tasora
INVITED: New computational algorithms for the Limit Analysis of large-scale 3D truss-frame structures
Rosalba Ferrari, Giuseppe Cocchetti, Egidio Rizzi
INVITED: Limit analysis of masonry structures based on fictitious associative-type contact interface laws
Francesco Trentadue, Giuseppe Quaranta
INVITED: Nonlinear dynamic mesoscale analysis of masonry buildings subjected to earthquake loading
Corrado Chisari, Lorenzo Macorini, Bassam A. Izzuddin
INVITED: Modelling of out-of-plane loaded vertically spanning unreinforced masonry walls under static and dynamic loading: comparison between four modelling approaches
Michele Godio, Katrin Beyer
INVITED: Discrete and continuous models for the estimation of the seismic vulnerability of masonry church
Marialaura Malena, Giovanni Tommaselli, Gianmarco De Felice, Raffaele Gagliardo, Francesco Portioli, Chiara Calderini
INVITED: A simple contact model for dynamic analysis of masonry block structures using mathematical programming
Francesco Portioli, Elias G. Dimitrakopoulos
INVITED: Limit analysis of masonry arch bridges containing internal spandrels
Serenella Amodio, Matthew Gilbert, Colin C. Smith
INVITED: Damage assessment by Non-Smooth Contact Dynamics method of the iconic crumbling of the clock tower in Amatrice after 2016 central Italy seismic sequence
Francesco Clementi, Gabriele Milani, Valentina Gazzani, Marina Poiani, Stefano Lenci
INVITED: Limit analysis for a safety evaluation of masonry pavilion domes on octagonal drum subjected to increasing vertical loads
Carlalberto Anselmi, Filomena Galizia, Eduardo Saetta
Invited: Multiscale couple-stress model, FEM/DEM approach and Limit Analysis for the in-plane failure analysis of masonry walls: a critical review
Emanuele Reccia, Lorenzo Leonetti, Patrizia Trovalusci, Marco Pepe
INVITED: Rock mounted iconic lighthouses under extreme wave impacts: Limit Analysis and Discrete Element Method
Athanasios Pappas, Dina D'Ayala, Alessandro Antonini, Alison Raby
INVITED: Yield surface of a zero-tension masonry quadrilateral section subjected to an eccentric compressive force
Carlalberto Anselmi, Filomena Galizia, Eduardo Saetta
INVITED: A NEW DISCONTINUUM FINITE ELEMENT MODELLING APPROACH FOR MASONRY STRUCTURES
Davide Rapone, Giuseppe Brando, Enrico Spacone
INVITED: APPLICATION OF THE LiABlock_3D SOFTWARE FOR THE SEISMIC VULNERABILITY ASSESSMENT OF THE CASTLE OF BUSSI (ITALY)
Lucrezia Cascini, Francesco Portioli, Morena Forgione, Marcello Vasta, Giuseppe Brando

MS-046 Advanced Computational Methods in Underwater Acoustics

An edge-based smoothed point interpolation method for underwater acoustic propagation
Xiangyu You, Yingbin Chai, Wei Li

MS-047 Methods for structural problems with particular attention for Meshfree Methods

KEYNOTE: Line Element-less Method (LEM) for beams in torsion and Plates in bending
Antonina Pirrotta
INVITED: Extension of the Line Element-Less Method to Dynamic Problems
Carsten Proppe, Antonina Pirrotta
Application of BEM to defect detection by means of topology optimization with strain objective functional
Toshiro Matsumoto

MS-048 Computational Geomechanics

An oscillation-free finite volume method with staggered grids for solving problems of poroelasticity
Clovis Raimiundo Maliska, Herminio Tasinafo Honório
SPH modelling of consolidation problem based on two-phase mixture theory
Hao Wu, Jinjian Chen, Chencong Liao, Jianhua Wang, Jian Wang

MS-050 Stochastic Modeling and Uncertainties in Computational Mechanics of Materials

Keynote: A Multiscale Framework to Quantify the Competing Failure Mechanisms in Metal Matrix Composites
Yan Li

MS-052 Computational Models for Multiscale/Multiphysics of Extreme Heat Flux Materials

KEY-NOTE: DESIGN OF THE EUROPEAN DEMO WATER-COOLED BLANKET WITH A MULTISCALE-MULTIPHYSICS FRAMEWORK
Yue Huang, Fabio Cismondi, Eberhard Diegele, Giafranco Federici, Alessandro Del Nevo, Fabio Moro, Nasr Ghoniem
KEY-NOTE: Self-consistent multi-physics modelling for the analysis of the working conditions in gyrotron cavities.
Andrea Bertinetti, Ferran Albajar, Konstantinos Avramidis, Francesca Cau, Fabio Cismondi, Parth Kalaria, Laura Savoldi, Roberto Zanino
INVITED: Global thermal-hydraulic model of the EU DCLL breeding blanket
Iván Fernández-Berceruelo, Iole Palermo, Fernando R. Urgorri, David Rapisarda, Belit Garcinuño, Ángel Ibarra
INVITED: A multi-scale dynamic thermal-hydraulic modelling approach for the EU DEMO breeding blanket
Antonio Froio, Fabio Cismondi, Laura Savoldi, Roberto Zanino
INVITED: A multi-physics integrated approach to breeding blanket modelling and design
Gandolfo Alessandro Spagnuolo, Pierluigi Chiovaro, Pietro Alessandro Di Maio, Riccardo Favetti
INVITED: A coupled model for Helium flow along Eurofer cooling channels: practical implementation for TBM design
Sergio Sadaba, Francisco Jose Calvo, Joelle Vallory, Milan Zmitko, Yves Pointevin
Multi-scale approach to the thermal-hydraulic modeling of High-Temperature Superconducting magnets for fusion
Andrea Zappatore, Roberto Bonifetto, Laura Savoldi, Roberto Zanino
Magneto-convective analyses of the EU-DCLL outboard equatorial module using Q2D methods
Fernando R. Urgorri, Ivan Fernandez-Berceruelo, David Rapisarda, Iole Palermo, Angel Ibarra
Validation of multi-physics integrated procedure for the HCPB breeding blanket
Riccardo Favetti

MS-053 Computational modeling and experimental characterization of soft tissues

Identification of Neumann boundary condition assuring the destruction of target region of biological tissue
Lukasz Turchan

MS-055 Fractional Computational and Mathematical Models for Advanced Material Behavior

KEY-NOTE: Vibration reduction performance of floating slab track with fractional derivative model for rubber bearings
Shengyang Zhu, Xuancheng Xuan
KEY-NOTE: A fractional model for blood flow in small arterial vessels
Gioacchino Alotta, Emanuela Bologna, Mario Di Paola, Massimiliano Zingales
INVITED: Efficient complex modal analysis for noisy fractional-order systems
Alotta Gioacchino, Mario Di Paola, Giuseppe Failla, Francesco Paolo Pinnola, Giorgio Zavarise
INVITED: Boundary Element Method and Statistical Linearization solution of nonlinear fractional diffusion equations
Pol D. Spanos, Yiyu Jiao, Giovanni Malara
INVITED: A new class of functions for applications in modeling real materials and structures
Igor Podlubny, Iryna Trymorush
Fractional Viscoelasticity of Soft Materials: Modeling, Experimental Comparisons, and Uncertainty Quantification
William S Oates
Anomalous Diffusion in Periodic Phononic Crystals
Salvatore Buonocore, Mihir Sen, Fabio Semperlotti
Fractional Order Derivative Computation with a Small Number of Discrete Input Values
Dariusz Wojciech Brzeziński
Fractional viscoelastic modelling of the transient behavior of a reduced structural model
Michael Burgwitz, Matthias Wangenheim
Random vibration of beams resting on fractional dampers and non-linear supports
Andrea Burlon, Ioannis Kougioumtzoglou, Giuseppe Failla, Felice Arena

MS-056 Computational Marine Hydrodynamics

Hydrodynamic characteristics of twin rudders
Linfeng Chen
Numerical modeling of free-surface wave effects on flexural vibration of floating structures
Shahrokh Sepehrirahnama, Eng Teo Ong, Heow Pueh Lee, Kian-Meng Lim
Numerical simulation of Two-dimensional risers under oscillatory flows with low Reynolds and KC for predicting the involve forces response
Maria Catalina Valencia-Cardenas, Carlos Alberto Riveros-Jerez

MS-057 Advances on engineering computations and design optimization

Optimization of multi-functional laminates by a spectral element method
Elias Perras, Chuanzeng Zhang
Robust dynamic topology optimization under hybrid uncertainties using a level set method
Jing Zheng, ZHEN LUO
Topology optimization for cellular composite compliant mechanisms with auxetic metameterials by level sets
TAO WU, ZHEN LUO
Approximation of the parallel robot working area using the method of nonuniform covering
Larisa Alexandrovna Rybak, Mikhail Anatolyevich Posypkin, Alexander Leonidovich Usov, Dmitry Ivanovich Malyshev
Concurrent design of structures and materials with nonuniform microstructures
Hao Li, Liang Gao, Zhen Luo, Junjian Fu

MS-058 Multiscale computational modelling in biomechanics and mechanobiology

INVITED: Characterization of femoral nonlinear behavior through patient-specific CT-based FE modeling
Cristina Falcinelli, Alessio Gizzi, Giuseppe Vairo
The effects of solution techniques on the results of the simulation of human motion
Behzat Bahadir Kentel
Multiscale Analysis of Flow and Transport for Modeling Targeted Drug Delivery in the Cerebrovascular System
Vittoria Flamini, Omar Tanweer
Relationship between Train Speed and Aural Discomfort in Tunnels Based on Tympanic Membrane Model
Pengpeng Xie, Yong Peng, Shengen Yi, Junjiao Hu

MS-059 Advanced methods for engineering challenges in fracture mechanics

Non-equilibrium molecular dynamics simulations of the shock induced failure in Al with helium bubbles
FengChao Wu

MS-060 Polygonal, Polyhedral and Virtual Element for advanced applications

Keynote: The polygon finite element approach: From linear to nonlinear structural analysis
Jabareen Mahmood
INVITED: Some recent advances of the eXtended Finite Element Method in problems with interfaces and displacement singularities
Elena Benvenuti
INVITED: 2D and 3D isogeometric boundary element analysis of steady incompressible viscous flow
Vincenzo Mallardo
INVITED: Scalar damage in 2D solids: a VEM formulation
De Bellis c_Maria Laura, Peter Wriggers, Blaz Hudobivnik, Giorgio Zavarise

MS-061 Data-Driven Methods and Applications in Computational Mechanics and Materials

KEY-NOTE: Inverse Design with Variational Auto-encoder
Yujie Zhang, Wenjing Ye

MS-062 Impact of Computational Methods on architectural design and theories

KEYNOTE: Dealing with structural patterns based on Voronoi diagram: mechanical efficiency vs. visual complexity
Mele 2_Elena, Arianna Simeone, Valentina Tomei
Keynote: Applications of Structural Optimization to Architectural Design
Alessandro Beghini, Mark Sarkisian
INVITED: Computational Methods in Architecture. From theories to architectural design
Anna Irene Del Monaco
INVITED: Use of layout optimization in the conceptual design of building structures
Matthew Gilbert, Buick Davison, Linwei He, Andy Tyas
INVITED: The role of joints in the structural optimization of grid shells
Maura Imbimbo, Ernesto Grande, Valentina Tomei
An innovative Pedestrian-Bicycle Bridge Shape for Environmental Sustainability and Structural Efficient Improvement
Melania Lucci, Alberto Viskovic
Cosmotic, Aquatic. Exploring the Potential of Computational Design in the Preservation of Aquatic ecotones.
Aya Mohanna
Application of Parametric Modeling in the Early Design Phase for an Interdisciplinary Design Approach for Adaptive Buildings
Frederik Ernst

MS-063 Uncertainty quantification and structural reliability analysis

Keynote: Variation bounds analysis for structures under uncertain excitations
Chao Jiang, Jinwu Li
Analytical formulation of dynamic response bounds for structures based on interval process model
Jinwu Li, Chao Jiang
Sensitivity Analysis of a Real Gas Conical Diffuser using Uncertainty Quantification
Aihong Zou, Emilie Sauret, Wei Li, YuanTong Gu

Publication at eProceedings Only

Shape identification of unsteady heat convection fields to control temperature distribution
Eiji Katamine, Naoya Okada
Droplet morphology simulation with SPH: A simple method of implementing contact angles
Xiangwei Dong
A Measure of Engineering Students’ Pro-industry Behavior Adjust Industry 4.0
Chun-Mei Chou, Chien-Hua Shen, Hsi-Chi Hsiao, Tsu- Chuan Shen
Simulation of Smoke Flow in a Longitudinal Ventilated Tunnel in Macau
Hou Kuan Tam, Pak Hang Fu, Seng Kin Lao, Lap Mou Tam, Vai Kuong Sin
An inverse method for identification of continuously varying material properties in post-manufactured structures through neural networks
Shuyong Duan, Zhanming Zhang
Ball convergence for a multi-step Harmonic mean Newton-like method in Banach space
Ramandeep Behl, Ali Saleh Alshomrani, I K Argyros
Frictional contact analysis of functionally graded materials using smoothed finite element methods
Yufei Zhang, Junhong Yue, Ruiping Niu
An optimal reconstruction of Chebyshev-Halley type methods with local convergence analysis
Ali Saleh Alshomrani, Ioannis K Argyros, Ramandeep Behl
A class of novel tetrahedron elements with curved surfaces for three-dimensional solid mechanics problems with curved boundaries
Chunqiao Wang, Junhong Yue, Ming Li
An optimal iteration function for multiple zeros with eighth-order convergence
Ramandeep Behl, Ali Saleh Alshomrani
A Novel Method Combining Reverse Modeling and Topological Optimization for Lightweight Design of Automobile Wheel Hubs with Hollow Ribs
Pengfei Xu, Shuyong Duan, S. Liu
Seismic risk of masonry buildings: methods compared
Mariateresa Guadagnuolo
Highly Accurate Smoothed Finite Element Methods Based on Simplified Eight-noded Hexahedron Elements
Yanhua Li, Ming Li
An Optimal Eighth-order Family of Iterative Methods For Multiple Roots
Fiza Zafar, Saima Akram, Nusrat Yasmin
An Evaluation of Hegemonic Epochs – A Time Series Analysis
Mihai Caramihai, Irina Severin
Two parameters modelling of clay brick masonry confinement
Giancarlo Ramaglia, Francesco Russo Spena, Gian Piero Lignola, Andrea Prota
Recovering historical urban texture by parametric computing modeling" Historical Tehran as case study
saeed dolatkhah
A sequential method in inverse estimation of the absorption coefficient for the spot laser welding process
Long Nhut Phi Nguyen, Quan Nguyen, Son Hoai Nguyen, Tin Trung Le
Surface discretization based on bionic patterns in search of structural optimization
Ewelina Gawell, Anna Nowak, Wiesław Rokicki, Anna Klara Stefańska
The topological principles in the contemporary architectural design process
Vladimir Lojanica, Maja Dragisic
Implementing Axisymmetric Smoothed Finite Method (S-FEM) Element in ABAQUS to Analyze defective Pressure Piping
Xin Cui, Y.H. Qie, Shuyong Duan, S.H. Huo