Plenary Lecture & Thematic Plenary Lecture
| A frictional contact algorithm for implicit material point method | |
| Zhenpeng Chen, Xiong Zhang, Xinming Qiu, Yan Liu |
| In Vivo Magnetic Resonance Image-Based 3D Computational Models to Quantify Right Ventricle Morphological and Mechanical Characteristics for Healthy and Patients with Tetralogy of Fallot | |
| Heng Zuo, Dalin Tang, Chun Yang, Zheyang Wu, Xueying Huang, Rahul H. Rathod, Alexander Tang, Kristen L. Billiar, Tal Geva |
| The Effect of Residual Stress on Stress-Modulated Growth in an Artery | |
| Lucy T. Zhang |
| A Two-Phase Flow Model for Aerogel in a Non-Equilibrium Process | |
| Dia Zeidan, Eric Goncalves, Lucy T Zhang |
| Towards Virtual Testing of Flapping Flight | |
| Yao Zheng |
MS-000 General Papers
| Research on the biomechanics of lumbar muscles based on musculoskeletal model | |
| Xiaotong Zhan, Zhiyong Li, Qiang Chen |
| Periodic DFT study of structural transformations of crystalline dihydroxylammonium 5,5'-bistetrazole-1,1'-diolate under high pressures | |
| Guozheng Zhao, Hairui Sun |
| 3D Simulation of the Defect Generation by Hydrogen at $Si-SiO_2$ Interface | |
| Zhaocan Ma, Jingjie Xu, Hongliang Li, Yu Song, Linbo Zhang, Benzhuo Lu |
| A truss section size optimization design method based on constraint variation principle | |
| Yubin Liu, Xin Zheng, Shengjun Zhang, Feng Shen, Xiangrong Fu |
| Flutter frequency based on bending - torsion coupling theory | |
| Xin Zheng, Yu-Bin LIU, Pu CHEN, Feng SHEN, Sheng-Jun ZHANG, Xiang-Rong FU |
| Crashworthiness of Different Composite and Aluminum Tubes with Foam Filling by experiments and simulations | |
| Zheyi Zhang |
| Random walk of Brownian particles on non-uniform grids | |
| Jianwen Zhang, Zirui Li |
| Analytical and experimental investigation on crack generated in diameter-enlargement section | |
| Xia Zhu, Nagatoshi Okabe, Keiji Ogi, Hiromichi Toyota |
| High Order Discontinuous Galerkin Method for the Euler Equations Using Curved Elements | |
| Penghui Su, Liang Zhang |
| An optimal eighth-order scheme for multiple zeros of univariate functions | |
| Ramandeep Behl, Fiza Zafar, Ali Saleh Alshomrani, Moin-ud-din Junjua, Nusrat Yasmin |
MS-001 Theory and Formulation for Novel Computational Methods
| Nystrom extrapolation algorithm for solving delay Volterra integral equations with weakly singular kernel | |
| li zhang, Jin Huang, Yubin Pan, Hongyan Liu |
| Hybrid approximation spaces for solving compressible Navier-Stokes equations with high Reynolds number | |
| Fan Zhang, Jian Cheng, Tiegang Liu |
MS-004 Smoothed Finite Element Methods and Related Techniques
| A parallel preconditioned Gauss-Seidel iterative method tailored for smoothed finite element method’s solving | |
| Jianfeng Zhang |
| The design and development of the postprocessor for 2D S-FEM analysis software | |
| fei yu Zhang |
MS-005 Numerical methods blending mesh-based and mesh-free technique
| Thermoelastic analysis of FGM beam using meshless weighted least-square method | |
| Hongmei zhou |
MS-006 Modelling and Characterisation of Mechanical Behaviour of Advanced Materials
| An Experimental and Computational Study of Plastic Deformation in Silicon Carbides | |
| Dezhou Zhang, Liguo Zhao, Anish Roy |
| Mechanical Performance of Bioresorbable Polymeric Stents during Crimping and Expansion in Diseased Artery | |
| Tianyang Qiu, Liguo Zhao, Mo Song |
| Nanovoids induced homogeneous superplastic in metallic metal | |
| bida Zhu |
MS-007 Numerical modelling of nonlinear transient phenomena
| An Efficient Rotation-free Triangle and its Application | |
| Yexin Zhou |
MS-008 Algorithms, Software and Applications of Large-Scale Computation
| Fourier transform analysis of convergence properties of MultiGrid V-cycle algorithms | |
| Yu Zhang, Ming Li, Guirong Liu |
MS-009 Particle Based Methods
| Development of Generalized Interpolation Material Point Method for Fully-Coupled Thermo-mechanics with Applications to Model-Based Simulation of Failure Evolution | |
| Jun Tao, Zhen Chen, Yonggang Zheng, Hongwu Zhang |
| Simulation of high-velocity impact process of 3D woven orthogonal composite from meso-scale point-based model | |
| Yan Liu, Xuena Si, Xiong Zhang |
| Accelerating Peridynamics Program Using GPU with CUDA and OpenACC | |
| J.X. Li, J.M. Zhao, F. Xu, Y.J. Liu |
| Time-discontinuous Material Point Method for Transient Problems involving Discontinuities in Stress | |
| Yonggang Zheng, Mengkai Lu, Jiayong Zhang, Hongwu Zhang, Zhen Chen |
MS-011 Advanced Computational Methods in Underwater Acoustics
| Solving time-dependent acoustic problems with a Lagrangian meshfree finite difference particle method | |
| YongOu Zhang |
MS-012 Computational Modeling for Cardiovascular Disease and Biological Applications
| A Segmentation Method for Intracoronary Optical Coherence Tomography (OCT) Image Based on Least Squares Support Vector Machine: Vulnerable Coronary Plaque Cap Thickness Quantification | |
| Xiaoya Guo, Dalin Tang, David Molony, Chun Yang, Habib Samady, Jie Zheng, Gary Mintz, Akiko Maehara, Liang Wang, Xuan Pei, Zhi-Yong Li, Genshan Ma, Don Giddens |
| In Vivo Intravascular Ultrasound-Based 3D Thin-Walled Model for Human Coronary Plaque Progression Study: Transforming Research to Potential Commercialization | |
| Jian Guo, Dalin Tang, Genshan Ma, Liang Wang, David Molony, Habib Samady, Jie Zheng, Xiaoya Guo, Akiko Maehara, Gary Mintz, Jian Zhu |
| Reproducibility of optical coherence tomography imaging based measurements of the fibrous cap thickness in lipid-enrich atheroma | |
| Chunliu He, Zhiyong Li, Jiaqiu Wang, Yuxiang Huang, Yuehong Miao, Tongjing Zhu |
| A treatment planning of radiofrequency ablation for spinal tumor | |
| tian zhen |
| An FSI modeling approach to combine IVUS and OCT for more accurate patient-specific coronary cap thickness and stress/strain calculations | |
| Xiaoya Guo, Don Giddens, David Molony, Chun Yang, Habib Samady, Jie Zheng, Gary Mintz, Akiko Maehara, Liang Wang, Xuan Pei, Zhi-Yong Li, Dalin Tang |
| The method of personalized lumped parameter model of coronary artery | |
| Bao Li, Wenxin Wang, Xi Zhao, Boyan Mao, Youjun Liu, Zhou Zhao |
| Hemodynamic effects of lesion length on competitive flow with internal mammary artery bypass | |
| Boyan Mao, Huixia Zhang, Wenxin Wang, Bao Li, Youjun Liu |
| Applying virtual stent deployment to study flow-diversion treatment for intracranial aneurysms: the effect of stent compaction on post-treatment wire configuration | |
| Mingzi Zhang, Yujie Li, David I. Verrelli, Winston Chong, Makoto Ohta, Yi Qian |
| Modelling flow-diverting stent as porous medium with different permeabilities in the treatment of intracranial aneurysms: a comparison of a successfully treated case and an unsuccessful one | |
| Yujie Li, Mingzi Zhang, David I. Verrelli, William Yang, Winston Chong, Makoto Ohta, Yi Qian |
MS-013 Advances in BEM and Other Mesh-Reduction Methods
| Fast adaptive binary-tree mesh generation | |
| Jianming Zhang, Chuanming Ju |
| Expanding element interpolation method for 2D crack problems | |
| Jianming Zhang, Yunqiao Dong |
| On implementation of the boundary integral equation method | |
| Jianming Zhang |
| A double-layer interpolation boundary face method for potential problems in two dimensions | |
| Jianming Zhang, Weicheng Lin |
| Time-domain BEM analysis for elastodynamic problems using expanding element interpolation method | |
| Jianming Zhang, Yudong Zhong |
| An Automatic Topology Recovery Method Based on T-Spline Surfaces Reconstruction in BFM | |
| Baotao Chi, Jianming Zhang |
| Solving the pressure jump in conforming contact problems | |
| Xiaomin Shu, Jianming Zhang |
| Shape optimization of acoustic structure using an isogeometric fast multipole boundary element method | |
| Haibo Chen, Cheng Liu, Wenchang Zhao |
| A FEM/BEM based topology optimization of submerged bi-material shell structures under harmonic excitations | |
| Wenchang Zhao, Leilei Chen, Cheng Liu, Haibo Chen |
| Fluid-structure interaction eigenvalue analysis by using a coupled FE-BE solver | |
| Changjun Zheng, Chuanxing Bi, Haibo Chen, Chuanzeng Zhang |
| Numerical simulation of galvanic corrosion by boundary node method | |
| Sanshan Tu, Hong qi Yang, Liang Zhou, Yi Huang |
| Determination of scattering frequencies for 2D acoustic problems using boundary element method | |
| Haifeng Gao, Changjun Zheng |
MS-016 Multiscale modelling of damage and fracture in quasi-brittle materials
| A discrete-continuum coupled finite element model to simulate all failure modes in fibre reinforced concrete | |
| hui zhang, Yujie Huang, Zhenjun Yang, Shilang Xu |
| Three-dimensional meso-scale cohesive fracture modeling of concrete using a Python script in ABAQUS | |
| Yujie Huang, Yang Zhenjun, Liu Guahua |
| Cracking pattern of shale reservoirs by water, CO2 and nitrogen fracturing | |
| Jianguo Wang, Xiangxiang Zhang |
MS-019 Large Scale Coupled Problems and Related Topics
| Force Analysis of Coastal buildings Damaged by Tsunami Wave Impact Load using Fluid-Structure Coupling Method | |
| Hongjie Zheng, Ryuji Shioya, Naoto Mitsume |
MS-024 Advanced Computational Methods for Soft Matters
| Auxetic metamaterials of square structure | |
| Yu Zhou, Zishun LIU |
MS-025 Modelling and Simulation on Nanomechanics
| Phase transition of two-dimensional water/ice in graphene nanocapillaries | |
| YinBo Zhu |
| Strain rate and temperature dependent mechanical properties in CNT-reinforced magnesium composites | |
| Xia Zhou, Xiaoxia Liu, Mengqi Shen |
| Mechanical Properties of Silk Fibroin and Silk-Graphene Interactions based on Molecular Simulations | |
| Yuan Cheng, Yong-Wei Zhang |
MS-027 Multiscale and Multiphysics Modelling for Complex Materials
| On more efficient and flexible peridynamics-based computational tools | |
| Ugo Galvanetto, Mirco Zaccariotto |
| A new multiscale computation method for geometrically nonlinear analysis of 3D fluid actuated cellular structures | |
| Jun Lv, Liang Zhang, Hongwu Zhang |
MS-028 Advanced Computational Methods for The Mechanical Modeling of Materials and Structures
| Explicit Isogeometric Topology Optimization Using Moving Morphable Components (MMC) | |
| Wenbin Hou, Yundong Gai, Xuefeng Zhu, Ping Hu, Xuan Wang |
MS-029 Computational Methods in Engineering
| A Symplectic Approach for Attitude Optimal Control of Spacecraft Solar Array Deployment | |
| HongWei Zhong, shaowei yang, zhiqin cai |
MS-030 Phase-field Method: Theory, Algorithm and Application
| A coupled phase-field and finite element method to simulate the elastoplastic deformation induced cementite dissolution in pearlitic rail steels | |
| Hu Chen, Chi Zhang, Lei Chen |
MS-032 Recent Advances in Meshfree and Particle Methods
| A new formula for predicting the crater size of a target plate produced by hypervelocity impact | |
| zhilang Zhang, moubin Liu |
MS-033 Modelling and Simulation of Multifunctional Composite Materials
| A Molecular Dynamic Study on Nonlinear Vibration Behaviors of Fe Nanowires | |
| Xu Xu, Zhuoqun Zheng |
MS-035 Computational ship mechanics: theory, numerical methods and engineering applications
| Simulation and experimental validation of hydraulic collecting in deep-ocean mining | |
| Guocheng Zhao, Longfei Xiao, Weijie Zhao, Yangrui Cheng |
| Smoothed point interpolation method (S-PIM): A brief history and recent developments | |
| Guiyong Zhang, Da Hui, Shuangqiang Wang, Huan Lu, Gui-Rong Liu |
| Numerical method for underwater explosion loads and the associated structure damage | |
| Rui Han, Yunlong Liu, Aman Zhang |
| Coupling immersed boundary-lattice Boltzmann method with smoothed point interpolation method for large-displacement fluid-structure interaction problems | |
| Shuangqiang Wang, Guiyong Zhang, Yunan Cai, Sheng Li, Jianhua Lu |
| Numerical simulation of shipboard-iceberg collision | |
| zhigang huang, guiyong zhang |
| Numerical simulation of the ice resistance in pack ice conditions | |
| Biye Yang, Guiyong Zhang |
| Comparation with different interface capturing schemes based on gradient smoothing method using unstructured meshes | |
| Da Hui, Guiyong Zhang, Zhi Zong |
| Numerical Predictions of Hydrodynamic Forces and Squat of Ships in Confined Waters | |
| Yi Liu, Lu Zou, Zao-Jian Zou, Teng-Chao Lu |
| Numerical modeling of bubbles near rigid boundary using OpenFOAM | |
| Shiping Wang, Tong Li, Aman Zhang |
| A dual wavelet shrinkage procedure for suppressing numerical oscillation for nonlinear hyperbolic equations | |
| Yong Zhao |
| Ice Load Calculation of Vessel sailing in Ice Flows by Using DEM Method | |
| Chen Ge, Xu Yong Ze |
| Study for the force and flow around multi-column structure | |
| Bo Zhou |
MS-037 Nanoscale thermal transport and nanomechanics
| Deformation mechanisms of diamond nanothread-based nanofiber | |
| Haifei Zhan |
| Nanoscale Heat Energy Transport: A Computational Study | |
| Gang Zhang |
| Hexagonal Boron Nitride: A Promising Substrate for Graphene with High Heat Dissipation | |
| Zhongwei Zhang |
MS-038 Computational and experimental methods on additive manufacturing and related welding technologies
| Numerical methods for predictions of mechanical properties and microstructural changes in laser additive manufacturing | |
| Zhao Zhang |
| Finite element simulation of friction stir additive manufacturing | |
| Zhijun Tan, Peng Ge, Zhao Zhang |
| Numerical methods of microstructural changes and predictions of mechanical properties in friction stir welding of AA6005-T6 | |
| Zhenyu Wan, Xia Zhou, Zhao Zhang |
| Edge Effect on Eddy Current Detection for Subsurface Defects in Titanium Alloys | |
| YIbo Wang, Qian Bai, Wei Du, Bi Zhang |
MS-041 Computational Methods in Acoustics and Elastodynamics
| Guided waves in piezoelectric cylindrical structures with sector cross-sections | |
| Bo Zhang, Jiangong Yu, Xiaoming Zhang |
| A meshfree method for dynamic analysis of rotating thick plates with third-order shear deformation theory | |
| chaofan du, Dingguo Zhang, Guirong Liu |
| Transient Wave Propagation and Early Short Time Transient Response Analysis of Piezoelectric Shells | |
| Yunying Zhou |
| The Effectiveness of the Perfectly Matched Layer in Fluid-Structure Interaction Problems | |
| Ni Zhen |
MS-044 Structural optimization method and application
| Stability Optimization of A Two-leg Shield Hydraulic Support Based on Its Force Equilibrium Zone | |
| Lichuang Liang, Hui Zheng |
| Topological optimization of anisotropic thermal structure based on meshless method and RAMP model | |
| Jianping Zhang, Shusen Wang, Shuguang Gong, Guilan Xie, Guoqiang Zhou |
MS-045 Computational Biomechanics
| Effectsof boundary on biofilm morphogenesis | |
| Cheng Zhang, Bo Li, Jing-Ying Tang, Xi-Qiao Feng |
MS-048 Numerical Analysis in Earthquake Engineering Geology
| Seismic responses of high-rise intake towers considering multiple-support excitation effects | |
| Hanyun Zhang |
MS-054 Coupled thermal-mechanical computation for high-temperature materials
| Theoretical computation on the critical resolved shear stress of metals at different temperatures in pure shear mode | |
| Jianzuo Ma, Weiguo Li, Peiji Geng, Xuyao Zhang, Ying Li, Yong Deng |
| Modeling of Temperature-dependent Shear Modulus of Bulk Metallic Glasses | |
| Xianhe Zhang, Weiguo Li, Peiji Geng, Ying Li |
| Theoretical prediction on temperature-dependent non-steady-state first matrix cracking stress for fiber reinforced ceramic composites | |
| Yong Deng, Weiguo Li, Xuyao Zhang |
MS-055 Numerical Methods Based Unstructured Meshes and Their Applications in Engineering
| Extended finite element method with gradient weighted technique for fracture analysis | |
| Feng shi zhe |
MS-060 Computational Mechanics of Functional Materials and Structures
| Characteristics of the guided evanescent waves in functionally graded cylindrical curved plates | |
| Xiaoming Zhang, Anru Gao, Jiangong Yu |
| Analysis of an interface crack in two-dimensional piezoelectric materials under impact loading | |
| ruifeng Zhang, chuanbing Yu, cunfa Gao |
MS-062 Stochastic Modeling and Uncertainties in Computational Mechanics of Materials
| Probabilistic fracture toughness prediction of composite materials | |
| Yan Li, Min Zhou |
MS-065 Computational Marine Hydrodynamics
| Numerical simulation of turbulent flows in a channel with a series of groynes by ZDES | |
| jingxin zhang |
| The fully coupled effects of FPSO with different filling ratio tanks in CFD method | |
| Yuan Zhuang, Decheng Wan |
| Three-dimensional Simulation of Liquid Sloshing in an Elastic Tank | |
| Youlin Zhang, Decheng Wan |
MS-066 State-of-the-art modeling on discrete element simulation
| A Numerical Approach for Softening and Melting of Particles in Packed Beds | |
| Wenjing Yang, Zongyan Zhou |
MS-073 Computational fatigue and fracture mechanics performance
| On the foreign object damage based fatigue mechanism of high-speed railway axles | |
| Y Luo, S.C. Wu, Z.W. Xu, Z.X. Zhang, Z.W. Li |
| Synchrotron X-ray tomography based defect tolerance of additively manufactured Ti-6Al-4V | |
| Zhe Song, S.C. Wu, J Zhang |
| A novel methodology of calculating general SCF for fatigue analysis of overlapped leg joints in offshore structures | |
| Jian Zhang |
MS-074 Fast Computational Methods for Structural Optimization and Design
| Simplified and fast modeling of automotive body frame | |
| Chungyang Gui, Wenjie Zuo |
| Reanalysis based Approximate Bayesian Computation for Inverse Heat Conduction Problem | |
| Yang Zeng |
MS-077 Engineering Inverse Problems: theory and numerical methods
| An Integrated Framework for Uncertainty Propagation with Hybrid Uncertain Variables based on Dimension-reduction Method | |
| Yu Zhongbo |
MS-100 Advanced Computations in Engineering Science (by invitation only)
| Identification of Voids Using Topological Derivative and Level Set Method | |
| Xuan Li Zhang, Gang Yang, Dean Hu |
| From meshfree PIM to smoothed PIM (S-PIM) and smoothed FEM (S-FEM): an overview on the development of meshfree methods at ACES | |
| Guiyong Zhang |
| Striving for ACES solutions to complex systems: fluid dynamics, fluid-structure interactions, and multiphysics coupling | |
| Zhi-Qian Zhang |
Publication On e-Proceedings Only
| Development of the advanced software package based on S-FEM | |
| Ruiping Niu, J.F. Zhang, J.H. Yue, Y. Li |
This work is licensed under a Creative Commons Attribution 3.0 License.